Excavation of artificial caverns inside asteroids by leveraging rotational self-energy

Future space ventures will likely require exploitation of near-Earth asteroid resources. Moreover, it can be envisaged that asteroids may host habitats in their interiors. In fact, a cavern inside an asteroid would be a natural radiation shield against cosmic radiation and may also serve as a confined environment for storage of mined material such as water ice or other processed volatiles such as propellants. To this end, this paper proposes to leverage the asteroid rotational self-energy to remove material from the asteroid interiors and create a spherical cavern, by means of the orbital siphon concept. The siphon is a chain of tether-connected payload masses (the asteroid material), which exploits the rotation of the asteroid for the delivery of mass from the asteroid to escape. Under certain conditions the siphon can be initiated to ensure self-sustained flow of mass from the asteroid to escape. A net orbital siphon effect is generated by connecting new payloads at the bottom of the chain while releasing the upper payloads. Key parameters are discussed, such as the required siphon dimension and the maximum size of the internal cavity that can be excavated, as a function of the asteroid rotational period. Moreover, assuming elastic material behaviour, a closed-form expression for the stress tensor is found and a failure criterion is used to identify regions in the asteroid interiors subjected to the larger stresses. It is shown that the conditions for failure are relaxed as the radius of the internal void increases.     

过氧化氢/紫外线/臭氧氧化技术处理肼类污水的应用

采用放大试验规模（处理量1 m³/h）的H₂O₂（过氧化氢）/UV（紫外线）/O₃（臭氧）氧化技术处理肼类推进剂污水，在30.0±1.6 ℃，pH=9.0±0.2的条件下，研究肼类的过氧化氢增强光解臭氧化降解。对比不同氧化技术的协同效应以及对污水降解的影响，重点考察过氧化氢、紫外线、臭氧和初始浓度等工艺参数对降解效果的影响，对氧化技术的应用进行了优化。研究结果表明：该技术可使COD去除率提高27.66%，肼类的降解速率随着过氧化氢投加量、紫外线辐射强度、O₃投加速率和水质地提高而升高，随着初始质量浓度的提高而下降。在最佳工艺下，处理5 000 mg/L质量浓度的废水，处理60 min时，COD去除率分别为98.62%（偏二甲肼）、99.17%（甲基肼）、99.94%（肼）和93.25%（单推-3）。     

高速加工的发展及其关键技术

介绍了高速加工技术的特点及发展，并重点介绍了高速主轴单元、高速加工进给系统、高速切削刀具材料等关键技术。     

如何避免企业在开发MIS中的失败

本文从认识、技术及管理几个方面论述了MIS建设失败的原因,阐述了企业如何避免MIS开发的失败以及企业如何选择协作单位来开发MIS。     

电连接器接点焊接工艺研究

针对航天产品电连接器接点焊点与引线断裂失效问题,分析了焊接过程中助焊剂、焊料、焊接工具和防护套等对接点焊接质量的影响。结合实践经验,提出相关工作参数和材料的选取原则,确定了生产中焊接技术的质量控制点。     

用两端安装法检定热电偶

利用一种设计好的专用检具 ,使两束被检热电偶分别从检定炉的两端安装均可保证符合检定规程的要求 ,从而在不添置新设备的情况下 ,使检定热电偶效率大大提高。     

航空犯罪防控的系统工程分析

通过对航空犯罪防控的系统分析,探寻航空犯罪防控工作规律,研究系统构建的技术方法,认识防控系统工程的特征,做好航空犯罪防控工作。     

串联系统耗用资源最小的一种直接寻优算法

本文提出了串联系统在满足系统目标可靠性要求y之下,使非线性约束(资源)达到极小的一种直接寻优算法。     

工程陶瓷的加工技术

主要介绍了国内外工程陶瓷特种和常规加工技术的开发及应用近况。     

工业工程在重新规划和改进钣金车间生产现场中的应用

通过分析对比，详细介绍了南飞公司应用工业工程重新规划和改进钣金车间生产现场的作法，以及所取得的技术经济效果。